Drivers of utilities, trucks, and cars who are transporting loads that reach past the outer edges of their trailer or vehicle, must be extra careful and follow the rules that are established for safely moving larger loads. The laws are developed for hauling to safeguard all drivers. Any projecting loads, therefore, should be transported with extreme care and safety.
Consider Safety First
If you carry materials in your ute, furniture in a trailer, or wide loads on a truck, you must know and follow the laws established in this respect. When carrying a load on your car or truck, you need to consider the following:
- The total dimensions allowed for your car or trailer, plus the load
- The legal requirements for safety when carrying projecting loads of varying sizes
- How to facilitate towing or hauling when a load is too big
When transporting a load, you must ensure that it will not surpass the legal limits with regards to height, length, width, or the rear overhead of your trailer or vehicle. The load is taken into account by reviewing the dimensions. The dimensions may include a trailer hire in Perth or the dimensions for a vehicle, as well as the dimensions established for the projecting load. Remember, if your trailer or vehicle is built to the optimum dimensions, you won’t be able to carry a projecting load.
Alert Others About Your Load
Loads that project from the back of a trailer, car, or truck do not need to carry a warning device, as long as they project less than 1.2m. Any load that projects over this length must display the alert. Warning devices in the day should be brightly hued in yellow and red, with a yellow flag at least 450mm by 450mm affixed to the very back of the load.
During the night-time hours, the display should be in the form of a red warning light that is visible from 200m away or at least two red reflectors, both which reflect from the headlights off any following vehicle. Whether it is day or night, a warning device must be presented at the very back of a load and be clearly visible to people.
How to Measure a Projecting Load Correctly
In addition, loads should not project over 1.2m in front of the headlights of a vehicle. They should also not project over 150mm beyond the side of a trailer or vehicle. When measuring how far a load projects from the side of a trailer or vehicle, measure from the end of a vehicle or body of a trailer, not from the lights, reflectors, or rear vision mirrors.
If the projecting load you are carrying is hard for other drivers to see, it must show a warning device, regardless of how far out it projects. An object that projects from the rear, side, or front of a vehicle may prove to be a distraction to others. It may also collide with other vehicles or injure people on foot. Therefore, make sure you are within the legal bounds, even for short travel trips.